This yacht it is a sistership of M/Y BARON TRENCK built for the commercial and pleasure yachts markets. Her main characteristics are noticeable sea-keeping together with a good cruising speed and outstanding manoeuvrability in restricted waters. Interiors: Owner’s suite on main deck, double cabins and crew cabins on lower deck and upper deck as per General Arrangement Plan. This 44M Eurocraft accommodates up to 12 guests in 5 to 7 staterooms and 9 crew in 5 cabins.
For more information, please contact Darrell on +33 (0)6 80 867 992 or email darrell@yacht-zoo.com
Any reproduction of the contents of this document for advertising in any medium in part or in its entirety is strictly forbidden without YACHTZOO’s prior written consent.
Please contact Darrell Hall at +33 (0)6 80 867 992
Lisätiedot ja varusteet:
Veneen Nimi
EUROCRAFT 44m
Tiedot
Rakentaja: Eurocraft
Mitat
LOA: 44.0 m
Leveys: 7.20 m
Minimisyväys: 3.10 m
Maksimisyväys: 3.10 m
Moottorit
Moottori 1:
Moottorin Merkki: MTU
Moottorin Malli: 12V 2000 M60
Moottorin Tyyppi: Sisäkone
Moottori 2:
Moottorin Merkki: MTU
Moottorin Malli: 12V 2000 M60
Moottorin Tyyppi: Sisäkone
Moottori/Polttoaine: Diesel
Main deck - Full beam main salon with dining area - Full beam Master stateroom with separate study
Upper deck - Skylounge - Option for Spa area or twin stateroom, portside - Option for 1 twin stateroom, starboard - Captain's cabin - 1 double crew cabin - Wheelhouse
Wellness and Jacuzzi A six places Jacuzzi pool will be fitted in the 16m sundeck, with sunbathing area and shower A wellness area with sauna and Turkish bath will be provided in the upper deck (Optional)
Capacities
Displacement (approx. light) 380 t Displacement (approx. heavy) 425 t Fuel capacity ~ 105000 l Fresh water capacity ~ 23270 l Black and grey water ~ 4270 l Ballast water ~ 37700 l Dimensions to be confirmed after stability and preliminary GMT calculations
Mechanical, propulsion and engine room equipment
Two diesel engines MTU 12V 2000 M60, 600 kW power at 1800 rpm, coupled to two ZF 2550 reduction gears. One Naiad Marine VT75 transversal hydraulic bow thruster with a thrust of 83 kW will be installed. The control will be from bridge wings and wheelhouse. Four hydraulic Naiad Marine Model 525 zero speed stabilizers with 2.33 m2 fins will be fitted. Two identical freshwater makers Seafresh H206A.F, capacity 2272 l/day each Two fuel separators CJC PTU 1 27/54 Three (3) sets of Onan generators will be installed. Each 80 Kw 400 VAC – 3 ph – 50 Hz generator Shore supply 400 Volt, three-phase, 50 Hz with insulation transformer.
Tender and toys
The tender and water toys are Owner’s supply; the following can be stowed on board: - One 5m yacht tender/rescue boat with inboard diesel engine/out drive propulsion for aft upper deck (max 1000 kg); - One 3.8m service tender or two jet skis for fwd upper deck
Disclaimer
All speeds, measurements, capacities, consumptions, etc., may be approximate or estimated. Specifications provided for information only. Data was obtained from sources believed to be reliable and is not guaranteed by Owner or Brokers. Buyer assumes the responsibility to ascertain the correctness of all data contained herein and otherwise provided and must instruct his agent and surveyors to confirm all details for accuracy prior to purchase. Subject to prior sale, price and inventory change, or withdrawal from market without notice.