Specifications and Construction
Name: Métisse
Design/Build: Alberg
Model: Odyssey 30
Class: Sloop-Rigged
Builders Name: H & L Marine - San Carlos, CA
Designer: Carl Alberg
Hull number: 1
Official Number: 1214411
Net Tons: 6
Gross Tons: 7
LOA: 29’ 10”
LWL: 22’
Beam: 8’ 10”
Draft: 4’ 9”
Ballast: 3,300 lbs
Displacement: 11,500 lbs
Deck Equipment:
Bow Pulpit: 1” Stainless Steel
Deck Stanchions: 1” Stainless Steel, Tapered
Life Lines: 7x19 Stainless Steel, Plastic Coated & Nylon Line
Bow Cleat: 8” Bronze
Mid-Ship Cleats: 6” Bronze
Stern Cleats: 8” Bronze
Bow Anchor: 35 lbs CQR
Bow Anchor Rode: Nylon
Bow Anchor Chain: 100’ Galvanized
Stern Anchor 20 lb Danforth
Stern Anchor Chain: 25’ Galvanized
Stern Rhode: Nylon
Windlass: Manual
Rigging:
Main Mast: Enamel Coated Aluminum
Spreader: 1 x Enamel Coated Aluminum
Gooseneck: Fixed
Main Boom: Enamel Coated Aluminum
Running Rigging: Nylon Yacht Braid
Standing Rigging: 1x19 Stainless Steel Wire
Turnbuckles: Open Bronze
Chain Plates: Stainless Steel, Internal & External Bar; Bronze, External Bar Forestay
Winches:
- 1 x Barient
- 2 x Harken
- 1 x Barlow
Miscellaneous: Main Traveler, Cars, Genoa Tracks and Necessary Blocks/Organizers
Sails:
Sobstad Battened Main
90% Ullman Jib,2008 roller furling with matching canvas wrap
140% Light air Genoa, roller furling
Hank on Storm Jib
Hank on Spinnaker
Interior Appointment:
4 Berths
3-Burner Propane Stove w/Oven
Galley Sink with Fresh and Salt Water
Ice Box and designated space for Yeti cooler
AM/FM/CD/SiriusXM (lifetime membership) Stereo with Bose speakers
Groco Head with ElectroScan Unit
Layout from Companionway:
P/S bunks with settee’s below. Starboard settee has a set in table that’s easily removed. Ice box and nav station with cooler storage below (port) and galley across (starboard). Head forward to port with hanging locker to starboard. Spacious Vee berth in forward cabin with open chain locker.
Safety Equipment:
Fire Extinguishers: 2 x BI
Bilge Pumps: 1 x 12VDC
No. of PDF’s: 2 x Type III Adult
No. of Type IV PDF’s: 4 x Cushion
Distress Flares:
- 6 x Alert
- 4 x Locate
- 1 x Gun
Horn: 1 x Handheld Air
Bell: 1
Navigation Lights: Standard
Tankage & Plumbing:
Diesel: 2 x Stainless = 42 Gallons
Shut off Location: Below See Berth
Potable Water: 2 x Rubber Bladders = 39 Gallons
Plumbing: Reinforced Rubber Hose
Pressure System: Hand/Foot Pump
Waste: 1 x ElectroScan Integral Plastic
Heads: 1 x Groco w. ElectroScan Unit
Pump Out: 1 x 12VDC
Seacocks: Bronze Ball
Machinery / Propulsion
Propulsion: Single Diesel Natural Inboard
Primary Fuel System: Racor
Secondary Fuel System: Engine Mounted Canister
Fixed Extinguishing: Halon 1301
Main Engine: Yanmar
Model: 3GM30
Serial Number: 00737
Horsepower: 24 @ 3400 RPM’s
number of Cylinders: Three
Transmission: Kanzaki
Model: KM3A
Propellers: 1 x Bronze, 3-Blade 15RH10
Shafts: Stainless Steel, 1 IN
Cutlass Bearing: Bronze / Rubber
Zincs: Three
Rudder: Coated Wood
Steering System: Tiller
Electrical:
A/C System: 120 VAC
DC System: 12 VDC
Batteries:
- 2 x Group 27 / Below Starboard Quarter Berth & Bench Seat
- 1 x Group 27 / Below Port Quarter Berth Bench Seat
Construction:
The hull is fabricated of 1/2 - 1” FRP, and the deck is fabricated of Cored FRP. This vessel is equipped with a deck, sideshell, and internal liner. The liner was Mechanically Fastened and/or Tab Bonded to the hull and sideshell of this vessel and provides for the major support and foundation for the vessel. The hull and deck connections are Mechanically Fastened and/or Tab Bonded at some locations, as are all internal bulkheads. The internal longitudinal and athwart strength members were Mechanically Fastened and/or Tab Bonded on both sides to provide additional strength throughout the vessel.
Equipment:
1 x Attached Stainless Steel Anchor Roller Assembly
1 x Radar Reflector
1 x Datamarine Speed/Distance
1 x Standard Horizon Depth
1 x Raymarine ST4000+ Autopilot
1 x Lev-O-Gage Clinometer
1 x Icom IC-M602 VHF
1 x AM/FM/CD Stereo
2 x Bulkhead Mounted 12VDC Fans
1 x Brass Lantern
1 x Bulkhead Mounted Weems & Plath Clock
1 x Bulkhead Mounted Weems & Plath Barometer
1 x Xantrex TrueCharge 10+ Amp Battery Charger
1 x Xantrex 700W Inverter
1 x Sun Guard Solar Controller
2 x ICP Solar Model SE-1200 Solar Panels
2 x Stainless Steel Dorade Vents
8 x Fenders
Updates
2018
- New Fairclough winter cover
- Hull stripped and topsides repainted with 2 part Awlgrip
- Above water thruhulls replaced
2014
- Mast and boom stripped, primed and sprayed with 2 part Awlgrip
- Mast and boom hardware checked, serviced and rebedded
2013-2018
- New gel marine batteries, solar panels, electric converters
- Running rigging replaced 2013
- Routine maintenance on interior and exterior wood and finishes
- Routine maintenance on winches, windlass and blocks
2008
- Repair and replace canvas covers, dodger
- New 35' CQR with 100' chain
- New safety glass windows installed in all ports
- Complete exterior refinishing of all wood and fiberglass
- New roller furling installed on forestay with new jib
- New Icom radio installed
2007
- New propane tank with hoses, tubing and valves
- Installed autohelm
- Upgraded electronic navigation system
- New LED lights throught interior
2003-2007
- Reconstruction of Nav Station, Head & Galley, including: stove/oven, cabinets, sink, head, and all plumbing & valves
- New nav lights installed on mast
2006
- New electrical wiring w/ upgrade of busses, outlets & chargers
2005
- Reconstruction of bilge floor & sole
- New water tanks
2004
- Inspect, remove and replaced all through hulls
2003-2004
- Engine overhauled; Mounts replaced or repaired
- New fuel tanks built & installed
1987
- New Fiberglass/Plywood deck