2010 Hunt Yachts Harrier 258m

     "The Hunt Harrier 25 is a fast-touring sportsboat inspired by our Surfhunter 25. She's a classic runabout and a superior dayboat in one. Her sleeker profile cuts a more aggressive look, while her true Hunt Deep-V hull delivers the legendary rough-water performance and comfort that's made the Hunt ride famous. Her flared bow, lift strakes and chines deflect the spray so that those sitting aft are assured a smooth, dry ride. The engine is jack-shafted to the outdrive to make an open, useful cockpit while balancing the boat for optimum performance. Options include conventional and L-settee arrangements, removable stern seats, bow-thruster and more. The transom contains boxes for food, fish, beverages or bait. The Harrier 25 is an elegant yet potent yacht. With so many options for personalization, she can take you fishing, to the beach, and on family sightseeing adventures - in style." ~ Hunt Yachts

     Hull

• Molded, laminated, hand laid fiberglass with a deep V bottom, molded running strakes, hard chines and flared bow. The hull is cored with foam from the chines up to the rail. The hull is stiffened with foam cored longitudinal stringers and molded liners strategically tabbed to the hull.

     Decks

• Molded, laminated fiberglass with foam coring. The cockpit is a foam core liner bonded in place. There are two cockpit scuppers through transom, above waterline. There are two fiberglass deck hatches with molded frames and drains to bilge.

     Cabin/House

• Powdered coated aluminum windshield and soft top enclosure

     Rudder & Steering

• Volvo Penta hydraulic steering system with stern drive. Side power 12vdc bow thruster with a Blue Seas battery switch

     Rails & Lifelines

• Stainless bow rail and hand rails on foredeck and windshield sides

     Cleats & Chocks

• (1) 10" stainless bow cleat with two pop-up chocks, (4) 7" Harrier pop-up cleats for stern and spring cleats

     Anchors & Tackle

• Stowed in anchor locker

     Make/Model

• Volvo Penta 8.1 Gi

     Serial #

• 4012250705

     Horsepower

• 360

     Gear

• Volvo Penta DPS stern drive, #4202239072

     Location

• Mid-cockpit engine box, flex mounted to laminated stringers

     Cooling

• Fresh water cooled with raw water heat exchanger. 1" Marelon valve, Groco strainer, engine driven pump, discharging into the exhaust.

     Exhaust

• Wet exhaust with cast iron risers and elbow, 3" Y pipe, exhaust hose couplers to the stern drive exit

     Shafts, Bearings, Struts

• Steel jack shaft between the engine and stern drive

     Propellers

• VP stainless dual props

     Shift and Throttle Controls

• Single lever electronic VP control

     Gauges & Alarms

• Volvo gauges: RPM, oil pressure, temp, voltage, trim angle and fuel

     VHF

• Icom IC-M412

     Rader

• Garmin 5212

     Plotter

• Garmin (interfaced)

     Depth

• Garmin (interfaced)

DC

     Batteries

• (2) group 24 lead acid

     Location and Installation

• Strapped to a platform in the transom enclosure

     Wire

• Stranded copper, marine use approved

     Switches

• Blue Seas parallel switch plus T-class fuses

     Panel

• Breaker panel with several repeaters at console

     Cabin Lighting

• 12vdc over light in cabin and LED courtesy lights

     Navigation Lighting

• LED running and anchoring lights

     Bilge Pumps

• Rulemate 1100 and 2000 with manual overdrives

     Other  DC Equipment

• (2) wipers

AC

      Shower Power Connection

• Factory provided plug and wire to direct battery charger

     Charger and/or Inverter

• Guest Charge Pro 10 amp

     Type

• Gasoline

     Number

• 2

     Material

• Polyethylene

     Capacity

• 50 gallons x2

     Location & Installation

• Tanks are set below the cockpit

     Fill

• Deck fills with 1 1/2" USCG Type A2

     Vent

• USCG Type A1 hose to hull vents

     Overflow Hazard

• None would enter bilge during the normal fueling

      Lines

• USCG Type A-1

      Valves

• Apollo valves at each tank

      Filters

• Volvo water separator

     Grounding

• Fills are grounded, tanks are non-metallic

     Tank Material

• Polyethylene

     Capacity

• 15 gallons

     Location & Installation

• Below deck, set on platform and held with padded metal straps

     Fill

• Deck fill

     Vent

• Hull vent

     Description of System

• 12vdc Parmax pressure pump with feed to cockpit sink and transom shower wand

     Head & Plumbing

• Wilcox Crittenden head with 3/4" and 1 1/2" Marelon valve for intake and discharge. The discharge valve has three positions for overboard discharge, discharge to tank, and off.

     Holding Tank & Plumbing

• Polyethylene tank with deck pump-out and hull vent

     Sounding Device

• 12vdc horn

     Fire Extinguishers

• BC-1, 3lb in cuddy

     Carbon Monoxide Alarm

• Safe-T-Alert in cuddy

     High Water Alarm

• Rule high water alarm

• Bimini and full enclosure with stainless frame
• (2) Upholstered, adjustable helm seats
• Ritchie compass at helm
• Stainless bow and (2) stern rings
• Teak swim platform with stainless braces and telescoping ladder

     A Certified Professional Yacht Broker (CPYB) is recognized as having achieved the highest level of industry accreditation, available only to fully-qualified yacht sales professionals. The CPYB program is administered by Yacht Brokers Association of America in partnership with Florida Yacht Brokers Association, Northwest Yacht Brokers Association, California Yacht Brokers Association, Boating Ontario Dealers, British Columbia Yacht Brokers Association and Gulf Coast Yacht Brokers Association.

     The CPYB program is also endorsed by the Marine Retailers Association of the Americas (MRAA) Marine Industry Certified Dealership (MICD) program and leading yacht manufacturers as a key component of their own industry standards; the highest level of achievement for their member yacht sales professionals.

Experience & Validity

     The CPYB designation is earned by eligible yacht sales professionals, who, after serving a minimum of three years as a full-time professional, have successfully completed a comprehensive written examination to validate professional competency.

Continuing Education

     A CPYB is committed to their personal and professional development through continuing education, as mandated for CPYB recertification every three years.

Ethics & Standards

     A CPYB adheres to, and is accountable to, a nationally recognized Code of Business Ethics and conducts yacht sales transactions in accordance with a stringent set of industry standards of practice.

Fiduciary Responsibility

     A CPYB maintains a dedicated escrow/trust account to protect their client’s funds. A CPYB understands their fiduciary responsibility and obligations with respect to client funds.

Transaction Management

     A CPYB uses proven, industry-recognized transaction documents, which fully and clearly describe all terms and conditions of a transaction. Honesty & Integrity A CPYB maintains the highest standards of professionalism, acting with honesty and integrity.

Trust & Confidence

     A CPYB instills confidence, trust and consistency in all transactions involving fellow yacht sales professionals for the benefit of the client.

     The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.